Does anyone out there have a sound clip of a Duramax that is straight piped?
Printable View
Does anyone out there have a sound clip of a Duramax that is straight piped?
I DONT HAVE A SOUND CLIP BUT I PROMISE YOULL LIKE THE SOUND!!!! :cool:
Second that... :D
Make it 3 in a row as I've done mine also!! Love the ROAR!! Howard :D :D :D
LOUD on hard acceleration, mellow at idle, I like it. :D
i too have my dmax straight piped and will never go back. nothing better then watching peoples faces under hard acceleration...
duman333
Did you guys replaced the complete exaust to a biger one or just took the mufler out and welded a pipe of same diameter....Also how is the sound level in the cabin...
replaced muffler with section of 3.5" mandel bent pipe.Quote:
Did you guys replaced the complete exaust to a biger one or just took the mufler out and welded a pipe of same diameter....Also how is the sound level in the cabin...
sound in cabin is fine .... 'till you mash it to the floor. then you can hear the exhaust over the engine.
there is an area around 62-65 mph that is louder than the rest, but NOT objectionable.
You know it's loud when the people at the bus stop cover their ears as you roar by.... :D :D :D
Do any of you guys that are Straight Piped have a Sound Clip File?
I am considering this but, would really like to hear it first.
Thanks, Scott [img]smile.gif[/img]
For a sound clip no I don't have one.
Best i can describe is to find a gravel train going by and listen. It's throaty!.
Ok, 2 pronged question here.
1) will just removing the muffler give me a performance boost?
2) if yes, and using a 4" straight or mufflered exhaust as the 100% mark, what percentage of a gain would I get?
3) (not actually a prong, more of a fork) how much might it cost to just have the muffler replaced with a piece of pipe?
The research continues
Thanks
SledZep, King of the run on sentence