-
Some time back some one on this board istalled a CB antenna on the opposite side of the regular radio antenna. It had been installed through the cowl just like the radio antenna on their truck,it was such a nice clean intallation he even provided pictures of the install, at the time a CB antenna was low on my list and I did not save the info. guess what? It soared to the top of my list after buying a CB on sale at Camping World. Could one of you steer me to that post in history please? Thanks in advance. Stu
[ 03-02-2003: Message edited by: dmaxstu ]</p>
-
A search for "CB" and "Antenna" will bring up some more info.
SoMnDuramax came up with the mount and idea. His Picture Trail photos are not there, so you may have to post directly to him.
I copied the idea. My pics are here:
http://www.picturetrail.com/gallery/...370&uid=147085
I can email you the drawings for the correct dimensions to fab a mount.
-
TxDoc
Thanks for the prompt reply I would love to get that info. My e-mail address is hlbrsma@aol.com Thanks again. Stu
-
dmaxstu -- You've got mail.
-
I would also love to have a copy of your CB cowl mount drawings. Thanks
-
Vadmax2003
Forget about that 5th wheel Doc. Your TT weighs a ton less than an equivalent 5th wheel without all the windage. Instead go to www.aemfg.com and check out their Weight distributing hitch. Also www.jordanbrake.com can fix you up with a brake controller that's second to none. After that you'll think you're towing a 5th wheel and still have the bed of your truck available. I was a semi-trailer driver and I'll pull a TT anytime before a 5th wheel. In my signature check out my generator setup that's a winning setup as well.We boondock in the desert and it's like we're hooked to shore power. Stu
-
TxDoc
In my request for your plans for CB antenna mount I forgot to list my email address. It is cdpva33@hotmail.com. Thanks
-
dmaxstu
Thanks for the tip about the Blue Ox hitch. I had a pullrite on my 96 suburban and loved it. I had about 20,000 towing miles on it including a trip to Alaska in 2000. I could not find your generator set up in your signature. Perhaps you can point me there or email it to cdpva33@hotmail.com? Thanks!
-
TxDoc,
If you wouldn't mind sending me the the drawings/dimensions I would really appreciate it. I have a mount in my bed that I use when I have the camper shell off. During hunting season I use the camper shell and I hate using the magnetic mount. The info would be greatly appreciated.
e-mail allamerican1@ev1.net
Thanx
Mike
-
SoMnDMAX's cb antenna mount is terrific. The only issue that I had trying to build it was that I didn't have access to a welder. There ARE ways to make a bolt together unit if you are in the same boat that I was ;) I haven't had any problems with my bolt together mount in 36,000 miles.
-
VaDmax and AllAmerican1 you've got mail....
If I can get out of work at a decent time tonight I'll see if I can get my pictures moved to a different hosting site.
Matt
-
SoMnDMAX,
That's still the slickest antenna monut I've seen for our trucks!! Thanks again for all the work you did designing it!
-
That is a beautiful setup for the CB antenna.
Would you be willing to send me a set of your diagrams and dimensions.
Many thanks.
Bruce
brevam@hotmail.com
[ 03-03-2003: Message edited by: brevam ]</p>
-
if you could I would also like a copy of the drawings... thanks
Trent
Tsimpler@direcpc.com
-
Check your mail... [img]smile.gif[/img]
Matt
-
bob erickson
no worries... we have to stick together
I live south east of Albuquerque in the East Mountains
Sorry no where near Cruces about 4hours between us
After I do mine I will let you know if I am willing to do it again.
Trent
Your e-mail address didnt come through on the e-mail.
-
I have my bracket all cut out ready to be welded but before welding it I decided to assemble it with small bolts and install it, that way I could adjust the rake of the antenna so it matched the regular radio antenna. There is a chance that the CB antenna could be pointed in a different direction than the radio antenna without such adjustment. That would not be cool. Thanks again guys for such a good idea. Stu
-
Just out of curiosity, is anyone with their c.b. antenna mounted in this position running a linear???
I was wondering if the antenna's close proximity to the e.c.m. caused any glitches.
Tom
-
SoMnDMAX,
Thanks for the work on the CB antenna mount. Can you please send me a copy of the plans? Also where are you from in Minn? I grew up in NE Iowa and my mother is from Austin, Minn.
Thanks,
Galen
-
SoMnDMAX,
Sorry, forgot to add my email.
gschne@aol.com
Thanks :D :rolleyes: