Results 1 to 6 of 6

Thread: No 4WD

  1. #1
    Join Date
    Apr 2005
    Location
    Arroyo Grande CA
    Posts
    2

    Post

    I'm getting a little fed up with my 02 Duramax.
    Wheel studs busted.
    Rear axle seals replaced.
    Injectors went out.
    Then the glow plugs.
    Now it won't go into 4WD. A little embarassing sitting on the boat ramp this weekend with the tires spinning.
    Anyone know of this problem before I go to mt second home at the dealers tomorrow.

  2. #2
    Join Date
    Feb 2000
    Location
    Montana
    Posts
    11,398

  3. #3
    madmatt Guest

    Post

    Hey MP, did that switch fix yours?

  4. #4
    Join Date
    Apr 2001
    Location
    CA
    Posts
    13,576

    Arrow

    A new switch fixed mine when it was only a couple months old. No problem since.
    1985 Blazer 6.2
    2001 GMC 2500HD D/A
    dmaxmaverick@thedieselpage.com

  5. #5
    Join Date
    Feb 2000
    Location
    Montana
    Posts
    11,398

    Arrow

    Yup, a new switch did the trick. I was a little surprised when I picked it up at the parts counter. They stocked these switches, and I was told they move quite a few of them....

    MP

  6. #6
    madmatt Guest

    Post

    I'd bet we sell 3 dozen a year. most in the winter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •