Up to so far, I have been pleased with the conversion. But today, I found out something that makes me mad.
I must install a 2" body lift kit in the truck. One of the reasons I like my truck is its height. Could be worse, like 3"
I am going to have to leave the right motor mount raised 2" to allow the AC pump to fit. If I chose to forego AC, need to do nothing, but drop the right mount 2". AC is a must. So a 2" body lift kit will raise the front so the hood will close, and also allow space to drop the tranny, if a clutch is needed VS pull the entire powerpack.
I have so much engine under the hood, the hood will not close.
2" is hardly noticeable. So off we go.
Wayne