Results 1 to 2 of 2

Thread: 93' K2500 front end will not engage?

  1. 11-02-2006, 19:47 #1
    jfbushee
    jfbushee is offline John. B
    Join Date
    Jul 2006
    Location
    Freeport, Maine
    Posts
    16

    Default 93' K2500 front end will not engage?

    Trying to troubleshoot this problem, checked fuse and is ok. Checked power at plugs on differential no power to this point. Engaged the transfercase and driveshaft to frontend will work to the front. Can anyone help me with this thing point me in the right direction.
    Reply With Quote Reply With Quote
  2. 11-03-2006, 04:16 #2
    DA BIG ONE
    DA BIG ONE is offline Enthusiast
    Join Date
    Apr 2004
    Location
    Palm Beach, Florida
    Posts
    1,816

    Default Thermal Engagement

    Thermal engagement issues? Convert to electric system like in newer K2500's, or the better and cheaper way..........

    http://www.4x4posi-lok.com/app_chevy-k.html

    PM me your e-mail address, I have one NIB for less than wholesale.
    99 GMC SUB, 2500, 4x4, 6.5 TD (F) #H32 enhanced blk, Phaser timing set, B&D IC, 3" ATS exh, K&N w/prefilter, 4WD NVG 246, 4L80E kevlar Transgo off road/tow mods/B&M supercooler, 14 FF MagTec w/locker 3.42:1, 9.25" IFS frt/diff 3.42:1 w/ARB locker, AutoMeter Boost & pre-turbo pyro meter, 12,000 lb hydro winch, Warn classic bumper w/brushguard & diesel scoop, Max E-torq Stage 3, hi pop inj, oil bypass sys, on board air comp for front ARB locker & tire inflation, DynaView driving/auto-cornering lts, DZ nerfs, A/T 285/75/16 SilentArmor 3750 lb rated on 3750 lb rated Alcoa, 3 IP drivers 2 r spares.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules