To go allong with my new breather, I ordered the Edge system. Installed right here at the campground in Del Rio. Brochure says, "No mechanical work to be done in the campground". Well, the guys are working on, and running-up their bass boats all week. What's good for the gander, is good for the goose, me says.
I put the HyperTech back to stock, before I installed the EJ-W/Att. Was running the HT on level 2. Set the Edge on level 2, with fuelling tip-in set on 3. First impression on leaving campground. WOW! Much more solid, immediate, acceleration on launch. Noticeable reduction in throttle opening, felt under the foot. This only happens, by the way, after the engine warms up to 160+, since Juice won't allow additional fuelling until warm-up. A good thing, I think.
Question: Did I actually retain my accurate tire size/speedometer setting, after I put the HyperTech back to stock? I know that it's still set for stock tire size, which I have. (145/85) But, I had marked and rolled my tire, and set the (exact) measurement in the HP. Very accurate, as confirmed by measured ten miles, etc. Do I still have that setting, you reckon? J K, GMAC, other experts, usual suspects?
Any bets on how long before I'm singing the Edge Juice Warantee Blues? Hope all the gloom and doom I've read in here, doesn't come to fruition.
Have a good day, all.
Dick Wells