Results 1 to 20 of 29

Thread: 6.2/6.5 Diesel Conversions - The High Points

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default

    Quote Originally Posted by More Power View Post
    The diesel flywheels, clutches and pressure plates are specific to the diesels. Gas versions won't work.

    Jim
    the clutchpak off 454 is the same as 6.2.the flywheel is different but the clutchpak is the same part number.at least thy are on a 4 spd

  2. #2
    Join Date
    Nov 2011
    Location
    Walker Lake, Nevada
    Posts
    10

    Default C ya

    are one and two peice rear mains the same as far as the flywheel

    mark

  3. #3
    Join Date
    Feb 2000
    Location
    Montana
    Posts
    11,413

    Default

    Quote Originally Posted by duallyman30 View Post
    the clutchpak off 454 is the same as 6.2.the flywheel is different but the clutchpak is the same part number.at least thy are on a 4 spd
    The clutch disc used with the dual-mass diesel flywheel does not have any internal springs or dampers. The clutch disc used with the newer single-mass diesel flywheel incorporates a series of springs/dampers.

    So.... you have to be sure what flywheel you have before ordering/installing a replacement clutch disc.

    are one and two peice rear mains the same as far as the flywheel

    mark
    The same flywheel/flexplate can be used on either rear main seal engine.

    Jim

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •