Need to know the proper torque for the outer most nut "large" and centered between wheel studs that attaches to the axle stem of the front drive axle c/v assembly clamping the front wheel bearings, & hub together.
Truck is 1999 2500 burb 4wd.
Need to know the proper torque for the outer most nut "large" and centered between wheel studs that attaches to the axle stem of the front drive axle c/v assembly clamping the front wheel bearings, & hub together.
Truck is 1999 2500 burb 4wd.
This nut should be a 36 mm hex. My 95 manual says 180 lb-ft.
RJ, Thanks!Originally posted by ronniejoe:
This nut should be a 36 mm hex. My 95 manual says 180 lb-ft.
I use a German spec
"GOO TIN TIGHT"