I read somewhere that the later model L-65 (F) HD program needs to see 25Hg for wastegate solnoid circuit to function properly, would this still apply if I'm running a Turbomaster mechanical controller, or?
Enthusiast
Vacuum needed, or?
I read somewhere that the later model L-65 (F) HD program needs to see 25Hg for wastegate solnoid circuit to function properly, would this still apply if I'm running a Turbomaster mechanical controller, or?
99 GMC SUB, 2500, 4x4, 6.5 TD (F) #H32 enhanced blk, Phaser timing set, B&D IC, 3" ATS exh, K&N w/prefilter, 4WD NVG 246, 4L80E kevlar Transgo off road/tow mods/B&M supercooler, 14 FF MagTec w/locker 3.42:1, 9.25" IFS frt/diff 3.42:1 w/ARB locker, AutoMeter Boost & pre-turbo pyro meter, 12,000 lb hydro winch, Warn classic bumper w/brushguard & diesel scoop, Max E-torq Stage 3, hi pop inj, oil bypass sys, on board air comp for front ARB locker & tire inflation, DynaView driving/auto-cornering lts, DZ nerfs, A/T 285/75/16 SilentArmor 3750 lb rated on 3750 lb rated Alcoa, 3 IP drivers 2 r spares.
Posting Permissions
Reply With Quote