Last night coming thru cajon pass(I5), pulled over to answer nature, slammed door and marker lights went out. Still have headlights, drl, and dash lights. Checked fuse(#9), and replaced anyway to make sure. No joy. Checked under dash, wires from dealer installed alarm go to two wires coming from back of switch. running lights flash when alarm activated. Dealer(?) used crimp clamps to splice into harness, so I think at least one of the two wires is/are cut.
Problem is, my shop manuals are in AZ, and I'm in Fremont CA. AND, I can't remember whats involved in stripping the dash to get to the switch. I can't stuff my hands in, and damn sure cant get my soldering gun in. And dont want to destroy the dash unless necessary. Searched old threads and if anythings ther, I missed it. HELP!!!