Enthusiast
obd1,software
There was a company from sweeden I think that was selling software for the 94 and 95 vehicles. I think they were sponsers. They disappeared ,did they go out of business or just stop advertising at this site. Also has any one had experience with their product?
Enthusiast
The product you're referring to is GMCTDScan, google that name and it will net you the website.
Kennedy Diesel also has a scan software for the OBD-1 trucks too.
J
1982 C10 SCSWB 6.5TD, mods too extensive to list. (13.69 1/4 mile @94.6 MPH) RACE TRUCK
1982 C10 SCSWB 6.2NA, 2.73 700
1986 C10 SCLWB 6.2TD 3.73 700
1989 V20 SUB 6.2NA, 3.73 400
1994 G20 VAN 6.5NA, 3.42 60E
1994 K20LD ECSWB 6.5TD, 3.42 80E
1995 K20 SUB 6.5TD, Wrecked, ran into by stupid teen.
1995 C3500HD DRW 6.5TD, 12' Flatbed 5.13 80E
1995 C3500HD DRW 6.5TD, 18' Rollback Wrecker 4.63 80E
1994 C20HD ECLWB 6.5TD 3.73 80E Wifes Truck.
1995 C20LD ECSWB 6.5TD 3.73 80E
1995 K20LD SCLWB 6.5TD 3.73 80E
1996 K30 DRW 6.5TD 4.10 80E
1997 C10 Tahoe 2Door 2WD 5.7L to 6.5 Conversion Underway
Newbie
here is the website you may want to check it out http://www.enghmotors.com/default.aspx
Diesel-lover
Hi
i have used the software from enghs, i like it.
It works well.
New sub. 1996 6.5 ls 1500.
1994 Suburban K2500HD. 6,5 TD 251 000km. sold
3,5 inch exhaust, no cat.
Marine injectors. Removed snorkle
opened intake plenum. 3 gauge pillar. EGT.Turbo.Tranny temp. Fsd Cooler, resistor nr 9.
Top mounted Air to Air intercooler. Kennedy Turbo master
intercooler is installed.
look in: http://www.thedieselpageforums.com/t...ad.php?t=37313
Enthusiast
I have the ENGH software also and I like it. You may need a computer geek to help you set it up.
94 Chev Blazer, 6.5TD, 3.42, 4WD,Gear drive,,Remote FSD behind drivers headlight,,Mobil 1 in difs and trans,Rotella 30W, Over a quarter of a million miles !! Member -1.94 club.
Posting Permissions
Reply With Quote