7 of 8 poppped out easily, but #3 (driver's side bank, second from the front) is NOT moving for anything so far. My theory is that this is the cylinder on which the head gasket is leaking and the coolant has siezed the tip of the injector into its bore on the head. Bummer.

I need to get this injector out so I can remove the lower valve cover (which has already been compromised by my removal efforts) so I can get the head off to replace the head gasket. I've looked at the injector removal tool and think I see how it works, but I seriously doubt it will supply the force necessary to pull the injector. I'd really like to get the injector out without trashing it, but there will be one waiting for me the the dealer when I pick up the new valve cover - just in case.

So here's the question: How do I get this injector out?