Results 1 to 2 of 2

Thread: Casting # Help

  1. 02-05-2013, 11:06 #1
    w6bauer
    w6bauer is offline Bauer
    Join Date
    Oct 2008
    Location
    Michigan
    Posts
    83

    Default Casting # Help

    So I bought a 93 k2500 with VIN F for the 6.5TD, and pulled the motor I found out it is a 6.2L.

    I have some casting numbers off the block if there is anyone who can give me some information on this block I would appreciate it.

    Drivers side front of block near head ---> DJC 2 13
    Drivers side rear on bellhousing flange---> 14022660
    Passenger side rear of block---> 2F

    Thanks

    Will
    1996 GMC Suburban, 6.5 TD, 4L80E, 3.73 Full floating limited slip rear end, 285/75R16E Dayton Timberline ATII's.
    Reply With Quote Reply With Quote
  2. 02-05-2013, 11:27 #2
    john8662's Avatar
    john8662
    john8662 is offline Enthusiast
    Join Date
    Sep 2001
    Location
    Lubbock TX, USA
    Posts
    4,194

    Default

    2 piece rear main seal 6.2L
    1982 C10 SCSWB 6.5TD, mods too extensive to list. (13.69 1/4 mile @94.6 MPH) RACE TRUCK
    1982 C10 SCSWB 6.2NA, 2.73 700
    1986 C10 SCLWB 6.2TD 3.73 700
    1989 V20 SUB 6.2NA, 3.73 400
    1994 G20 VAN 6.5NA, 3.42 60E
    1994 K20LD ECSWB 6.5TD, 3.42 80E
    1995 K20 SUB 6.5TD, Wrecked, ran into by stupid teen.
    1995 C3500HD DRW 6.5TD, 12' Flatbed 5.13 80E
    1995 C3500HD DRW 6.5TD, 18' Rollback Wrecker 4.63 80E
    1994 C20HD ECLWB 6.5TD 3.73 80E Wifes Truck.
     1995 C20LD ECSWB 6.5TD 3.73 80E
    1995 K20LD SCLWB 6.5TD 3.73 80E
         1996 K30 DRW 6.5TD 4.10 80E
    1997 C10 Tahoe 2Door 2WD 5.7L to 6.5 Conversion Underway
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules