I need new hinges for my 96 and also a new door latch mechanism what year will fit my truck ? The parts houses want 150 bucks for the latch so I was hoping to find one at a junk yard .
Thanks Shaun
I need new hinges for my 96 and also a new door latch mechanism what year will fit my truck ? The parts houses want 150 bucks for the latch so I was hoping to find one at a junk yard .
Thanks Shaun
1996 k2500 extended cab automatic trans electric shift transfer case reman engine with 70,000 miles reman trans 60,000 miles
Howdy
In my experience, re: hinge pins, unless you can find a known newer one in a yard you will likely have the same problems with any used parts.
My neighbor is a salvage yard and he sells new hinge kits and latches.
The cost is high and the hinge pins are a pain to replace but most of the new kits are better than what the trucks came with.
Hope this helps
1996 Chvy 3500 CCDWLB 6.5 Heathed, NO vac, marine injctrs, ARB bumper, BIG pipe, 3" lift, bright lights, bypass oil system.
1986 Chvy 6.2 M1009 blazer RAM AIR, Headers, Custom interior
2001 Chinook RV, V10 gas
1974 John Deere 1530 diesel tractor
1993 John Deere 455 Diesel lawn mower
1967 GTO, 1989 Honda Transalp
2009 VW Jetta TDI, flashed and piped, 6speed, fun car!
1998 6.5 suburban, stock, daughter's
1993 6.5 3500 CCSWLB GM8, Heathed, big exhaust, gauges, Son's
1984 6.2 ATS turbo 3500, SCDWLB - Son's
3 kids, 1 wife, 1 dog
Gunsmith, Tactics Instructor, Fabricator USMC 87-93 Semper Fi!
Thanks for the reply a freind stoped buy today and gave me a new latch so I've got the door so it'll open and shut now still debating on hinges becuase they are welded to the body I might just try putting a new pin and bushings in it
1996 k2500 extended cab automatic trans electric shift transfer case reman engine with 70,000 miles reman trans 60,000 miles
I just completed swapping both pins and bushings on drivers side. Accrual hinges were fine and the dorman hinge pin kit worked well.
Spring was a pain but I compressed it in the vice and locked it with tie straps. Have a helper for the door weight. I had trouble managing on my own and wifie had to help out.