full of fuel, gauge reads empty with a light saying its low.
This is a work truck with 330,000 miles, a ladder rack and tool boxes, hope i don't have to remove the bed.
thoughts
full of fuel, gauge reads empty with a light saying its low.
This is a work truck with 330,000 miles, a ladder rack and tool boxes, hope i don't have to remove the bed.
thoughts
06 1ton 4X4 duramax/6speed ext.cab WT
Hummer wheels :^)
dual lift pump
Banks air intake
A stuck float on the fuel level sender? Can you get to the wiring harness to do some electrical tests?
I have a full load in the bed....so getting to the sending unit would be a last resort ( thanks GM for not putting a plate in the bed over the fuel tank sending unit)..
06 1ton 4X4 duramax/6speed ext.cab WT
Hummer wheels :^)
dual lift pump
Banks air intake
Not overly difficult to drop the tank. Lines, wiring, filler neck screws, ground strap, then 2 bolts.
Kennedy Diesel-owner
More than just a salesman-I use and test the products that I sell on a daily basis!
Superflow Lie Detector in house
2002 Chev K2500HD D/A CC Long LT 11.77@ 124mph at 7700# fuel only-e.t. needs help
2005 Chev K3500SRW D/A CC Long LT(SOLD)
2007 Chev K2500 Classic EC Short LT (Sold)
2012 GMC K3500SRW D/A CC Long LTZ Happy Birthday to me! Built 1 working day after my birthday and delivered 7 days later.
2016 GMC K3500SRW D/A CC short LTZ
Custom tuning in house using EFI Live tuning software!
fuel sending unit is $350...I guess I should have one if Im going to lower the tank huh??
anything else I should get while Im in there?
06 1ton 4X4 duramax/6speed ext.cab WT
Hummer wheels :^)
dual lift pump
Banks air intake
Before you get waist deep into this, be sure it is the sender, and not the gage or communication issue. Use a scanner to read the fuel % level. If it matches the gage, then it's likely the sender. If it doesn't, then it's more likely a gage (IPC) or harness issue.