Truck was running perfectly through Arizona and 15 minutes after fueling up, engine quickly loses power and dies. Replace the filter and bleed it, engine starts and runs for 30 seconds before stalling again. Return line one top of IP is clear and after purging air from the filter, air bubbles begin to develop as the engine sputters. Opening the filter air bleed shows air bubbling out. No smoke or any other issues, just power loss and stall. IP and injectors were replaced with good quality ones last year.

It's at the dealer now as I'm on the road with my wife who's 6 months pregnant. I'm guessing a line back towards the tank or the lift pump. Tank was on the short list for replacement when I got back from this trip.

Any ideas?

Thanks and happiness 4th!

Jon