Quote Originally Posted by rvdjr View Post
what about the extra length from the adapter? are there any issues with the length of the tranny input shaft? will i have to have a thicker flywheel to compensate for the thickness of the adapter?

i tried searching on ebay but didnt find anything. what should i put in the search box? the prices you listed scared me! how much do the normal used ones go for?
As long as you get all the parts that go with the adapter for a manual trans you will be fine. The crank Hub will give you the proper spacing. Actually I think all you need is the adapter and hub and I think one for an auto should work also. Your flywheel will bolt to it. One thing to make sure of is if your flywheel bolt patern is the same as the crank hub. I have one I can measure if you need.