rear disc brakes
I did mine on an '01 K2500HD; no, to replace the rotors you don't have to pull the hub from the spindle. However, if you intend on replacing the parking brake shoes it may help. There is a special spanner socket used for adjusting the tension on the outer hub bearing however.
Does your hub seal leak (either side)? My left side req'd replacement; I understand this was a common problem.
"Chessy56"
So. Milwaukee, WI
'01 2500HD, LB7, ~440K miles
"Stock" engine. Dual fuel filtration system with Kennedy lift pump, BF Goodrich Commercial T/A Traction tires (sold to a dude from Texas- it's living a warmer life just fine down there now!).
'17 2500HD, L5P (Happy Birthday/Merry Christmas to me!!!) Currently bone stock, 120K miles.
"Socialism is a philosophy of failure, the creed of ignorance and
the gospel of envy. Its inherent virtue is the equal sharing of misery."
Winston Churchill