Results 1 to 3 of 3

Thread: good injection pump but...

  1. #1
    Join Date
    Aug 2006
    Location
    Edmonton Alberta, Canada
    Posts
    52

    Default good injection pump but...

    Was hoping I can get a couple of ideas about my pump. I have what appears to be a new 4879 Humvee pump so I had it tested at a local diesel shop here in Edmonton and the tech said sure operates like a brand new pump, it runs perfect except for one thing, it doesn't produce any pressure down at low starting RPM 75 on the test bench.
    He said something in the starting circuit must be sticky so, I took it home to deal with later as he was saying it could be up to $1000 to rebuild it if it needs parts!

    I read through the entire Stanadyne rebuild manual and I didn't read about or see anything called or resembling a "starting circuit" within the pump!

    So is it possible that something really is just sticky from sitting for so long or is it more likely that it was a poor rebuild and someone did something incorrect and that is why there is no pressure at 75 pump RPM?

    I there something I can check or do i need to get it redone?

  2. #2
    Join Date
    Mar 2000
    Location
    Loyal WI US
    Posts
    10,795

    Default

    It is my understanding that the pump that you have has a head/rotor design similar to the DB2 4911. The 4911 had issues with hot starts due to low fuel viscosity and the fuel bypassing/leaking internally.

    Odds are this is the case.

    My sources tell me that most anything military (hard parts) gets pretty much wiped out in service requiring lots of parts which is why you got the high price quote.
    Kennedy Diesel-owner
    More than just a salesman-I use and test the products that I sell on a daily basis!
    Superflow Lie Detector in house
    2002 Chev K2500HD D/A CC Long LT 11.77@ 124mph at 7700# fuel only-e.t. needs help
    2005 Chev K3500SRW D/A CC Long LT(SOLD)
    2007 Chev K2500 Classic EC Short LT (Sold)
    2012 GMC K3500SRW D/A CC Long LTZ Happy Birthday to me! Built 1 working day after my birthday and delivered 7 days later.
    2016 GMC K3500SRW D/A CC short LTZ

    Custom tuning in house using EFI Live tuning software!

  3. #3
    Join Date
    Aug 2006
    Location
    Edmonton Alberta, Canada
    Posts
    52

    Default

    Quote Originally Posted by Kennedy View Post
    It is my understanding that the pump that you have has a head/rotor design similar to the DB2 4911. The 4911 had issues with hot starts due to low fuel viscosity and the fuel bypassing/leaking internally.

    Odds are this is the case.

    My sources tell me that most anything military (hard parts) gets pretty much wiped out in service requiring lots of parts which is why you got the high price quote.
    Ok that's good to know, so I will just have to bite the bullet and do it then.

    Would you think this would happen with a cold pump on a test bench and then still produce factory spec injection pressure/volume at higher engine operating RPM?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •