Got the exhaust done. I took it to a small private shop here in town and the guy was able to route it inside the frame. Not the best pics but it looks GREAT. It is 3" downpipe, and 3" all the way back. I was thinking about going 4" back after the downpipes but it would've been more expensive and after doing some research I didn't think it was worth it. I'm not building a race car. I got some exhaust wrap for the downpipes which will hopefully keep some of the heat down.
Another issue is that the stock 6.5 crossover pipe comes right infront of the front axle yoke. The exhaust guy said he could modify that so it would clear the front driveshaft.