Quote Originally Posted by convert2diesel View Post
Thats what they sell masking tape and sharpies for.

Looking good.

Bill
Thanks Bill,

Mostly kidding about the electrical connector puzzle...

Although, it took me a while to figure out one connector on the driver's side. The answer came when I remembered that it was for the oil pressure sender connection to the engine harness. On the passenger side, I had this important-looking connector on the harness that had no mate on the engine, then I remembered it was for the MAF sensor on the airbox (which was sitting on the parts table). And lastly, the glow plug controller module has 4 connections. I didn't do a good job documenting the wiring, so I had to dig through my photo archive to find a photo of a wired GPCM. The best photo I had only showed a part of the module, but after some head scratching it was enough. Every other electrical connector was, as Robyn said, pretty much self evident - there are so many of them...