-
A/C Wiring Problem?
I'm finishing up my '83 Suburban 6.5 swap and am working on the A/C. My A/C never worked since I've owned the rig so unfortunately I don't have a starting point.
I made new A/C lines to work with the new, passenger side pancake pump on the 6.5 engine. I tested for leaks and vacuumed over night. When I was getting ready to charge it I realized the compressor would not engage. I tried jumping the pressure switch on the accumulator and nothing. No power to the pressure switch and no power to the compressor clutch.
I checked the manuals I have saved on my computer and could not find a diagram(maybe I missed it though.) Does anyone have an AC electrical diagram or have any ideas what my problem might be?
Thanks!
'83 K10 Suburban, Turbo 6.5 Optimizer Swap.
DB2 Mechanical IP
4l80e w/ OEM Standalone Controller. NP208
Custom Exhaust- Downpipe inside frame
S10 A/C Box
3/4 ton springs.
265/75R16 ST-MAXX.
Much more...
Build thread: http://www.thedieselpageforums.com/t...847#post309847
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules