Hello, I know this has been posted countless times, but here goes again. How do I test the Fuel shutoff solonoid. My 6.5L will not start. I have replaced the PMD, oil pressure switch. I jumped the the supply pump, getting fuel to the t-valve. opened two injectors and cranked engine, no fuel out of injectors. I disconnected the fuel solonoid and applied 12v, did not hear anything. I then disconnected it from the pump and reconnected the original wire. I then turned the key to the on pos. the solonoid retracted/closed, thats it. when I turned key off the solonoid releases. is this normal? What is the proper way to test this device?