Results 1 to 4 of 4

Thread: Front wheel speed sensors,,,

  1. #1
    Join Date
    Feb 2010
    Posts
    101

    Question Front wheel speed sensors,,,

    On a 95 K3500 dually 4WD do I have to remove the front wheel bearing and then drive out the wheel studs and remove brake disk to replace the wheel speed sensors?

  2. #2
    Join Date
    Apr 2001
    Location
    CA
    Posts
    13,573

    Arrow

    To replace the wheel speed sensor, you'll need to replace the hub/bearing assembly (which may have the studs already installed). Double check, but I think they were R/L specific.
    1985 Blazer 6.2
    2001 GMC 2500HD D/A
    dmaxmaverick@thedieselpage.com

  3. #3
    Join Date
    Feb 2010
    Posts
    101

    Default

    Pretty sure brake disk on a 95 goes on the back side of the wheel flange, not between the wheel and the hub like the newer stuff.

  4. #4
    Join Date
    Apr 2001
    Location
    CA
    Posts
    13,573

    Arrow

    OK. Then you'll have to drive studs.
    1985 Blazer 6.2
    2001 GMC 2500HD D/A
    dmaxmaverick@thedieselpage.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •