Results 1 to 2 of 2

Thread: help me select the correct rear hub bearing or hub kit.

  1. #1
    Join Date
    Nov 2001
    Location
    mississauga ontario canada
    Posts
    306

    Default help me select the correct rear hub bearing or hub kit.

    I need advice.
    I AM TOTALLY CONFUSED, I have been to my GMC parts and my local supplier, a couple of phone calls were also made trying to order the rear axle hub bearing for my 2002 Duramax, 2500hd, 4x4, but no luck.
    The prices have ranged from $35.00 to $179.00, It appears that every one is looking at a different parts book or picture or no picture at all, I also think one price was for a dully hub.
    It would seem there are bearing, there are bearing kits, and complete hub kits,
    Does the hub kit come with the wheel studs installed?
    How many bearing are in the driver’s side rear axle hub?
    Does anyone have parts numbers?

    thanks for any help

    drive safe
    GMC 2002 DURAMAX, SLT, EXCAB SHORT BOX 2500HD, 4X4, AUTO
    ACCESS TONNEAU COVER, 3" STAINLESS TUBE STEPS
    JORDAN BRAKE CONTROLLER
    34ft 10,000 lb TRAILER, 50 GAL TRANSFERE FLOW TANK (total 76 gals)

  2. #2
    Join Date
    May 2002
    Location
    White Hall, AR
    Posts
    99

    Default

    I found some on the Timken website

    http://www.timken.com/industries/aut...rtCatalog.aspx

    Inner) NP706218 2 (11.5" R.G.)
    (Inner) NP910345 2 (11.5" R.G.)
    (Outer) NP145100 2 (11.5" R.G.)
    (Outer) NP913325 2

    This might get you somewhere. Timken & Federal Mogul are the only bearings I can think of atm. Good luck
    Last edited by DarylB; 08-24-2007 at 14:26. Reason: added info
    2002 Pewter 2500HD D/A EC SB 4wd Warn 12K SOLD! 103k miles
    2007 White 2500HD CC SB LBZ 4wd Warn 12K Stock

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •