'92 Kennedy Cooling upgrade
I just had the 130 gpm cooling system upgrade installed on my '92 MFI and after talking to John about a small problem I am posting this question.
The shop did a good job with the install but advised they could not mount the bracket for the air bleed/siphon valve in its original location.
I am looking for a good location to relocate the L bracket holding the bleed/purge valve. A picture would really help.
I think most of us know the valve is useful to bleed air and purge sediment from the fuel filter bowl after a filter change so I don't want to plug or delete this function.
Thanks,
Mick
DP member #38 1992 Chev K2500 RPO C6P 6.5TD 150K miles
2014 John Deere 1025R