Results 1 to 2 of 2

Thread: oil in pass through connector

  1. #1
    Join Date
    Nov 2015
    Location
    georgia
    Posts
    8

    Default oil in pass through connector

    Been hunting an erratic shift problem. Today I found oil in the pass through connector. Ive read this could be the cause of my shift issues. What is the best way to remedy this problem?

  2. #2
    Join Date
    Apr 2001
    Location
    Newberg Oregon
    Posts
    12,282

    Default

    Pass through, as in "on the tranny" ????

    4L60 OR 4L80 ???

    A poor connection can cause troubles for sure.


    Replace the tranny side wire harness and plug. (internal)

    Clean the chassis harness with electrical spray cleaner and reassemble

    Good luck with the gremlin.

    Robyn
    (1) 1995 Suburban 2500 4x4
    (1) 1997 Astro
    (1) 2005 Suburban (Papa Smurf)
    THIS IS BOW TIE COUNTRY

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •