chevy cummins conversion question

[rvdjr]

As long as you get all the parts that go with the adapter for a manual trans you will be fine. The crank Hub will give you the proper spacing. Actually I think all you need is the adapter and hub and I think one for an auto should work also. Your flywheel will bolt to it. One thing to make sure of is if your flywheel bolt patern is the same as the crank hub. I have one I can measure if you need.

at this point all my stuff is still bolted together so a measurement isnt needed at this time, but thanks anyway. i finally found the expensive adapters on ebay but still havent run across one of the used factory adapters.

[Burning Oil]

at this point all my stuff is still bolted together so a measurement isnt needed at this time, but thanks anyway. i finally found the expensive adapters on ebay but still havent run across one of the used factory adapters.

http://cgi.ebay.com/ebaymotors/Cummi...spagenameZWDVW

Good luck