Results 1 to 6 of 6

Thread: GM 6.5TD Oil Cooler Line Kit

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2000
    Location
    Greenfield, In
    Posts
    1,408

    Post

    We now have a complete oil cooler and line replacement kit.
    web page

    Greg
    Diesel Page Supporter
    Greg Landuyt
    Lubrication Specialist, LLC.
    1-888-306 4255
    greg@lubricationspecialist.com
    http://www.lubricationspecialist.com

  2. #2
    Join Date
    Aug 2003
    Location
    Dixieland, USA
    Posts
    138

    Thumbs up

    Nice Greg,

    What's the feedback been?

    How much of a PITA is installation on a 94 K2500 with "workfront" grill/lights?

    Are instructions included?
    1994 GMC K2500 L65 4L80E with 230,000miles 16mpg, Kennedy Chip, FSD Cooler, Straight Piped, RoyalPurple/Longrider 40W15 oil, PowerService DieselKleen, H2 rims with 265R17's and GMC centercaps.
    2005 VW Golf TDI, 72,000miles, 41mpg, all stock so far, B20 (Spinx fuel stations)

  3. #3
    Join Date
    Aug 2003
    Location
    Dixieland, USA
    Posts
    138

    Post

    I'll take that as a "no"?
    1994 GMC K2500 L65 4L80E with 230,000miles 16mpg, Kennedy Chip, FSD Cooler, Straight Piped, RoyalPurple/Longrider 40W15 oil, PowerService DieselKleen, H2 rims with 265R17's and GMC centercaps.
    2005 VW Golf TDI, 72,000miles, 41mpg, all stock so far, B20 (Spinx fuel stations)

  4. #4
    Join Date
    Mar 2000
    Location
    Greenfield, In
    Posts
    1,408

    Post

    Sorry I didn't see the post. I only know of one kit on a 94. I guess it was OK because I have not heard a word back. Some 94's have different lines.

    Greg
    Diesel Page Supporter
    Greg Landuyt
    Lubrication Specialist, LLC.
    1-888-306 4255
    greg@lubricationspecialist.com
    http://www.lubricationspecialist.com

  5. #5
    Join Date
    Aug 2003
    Location
    Hunter, ND
    Posts
    12

    Post

    Not sure if the '94' is me, but I do have a K2500 94 with these lines installed - Installation was pretty easy. Even if a bit messy.

    I have a remote mounted Amsoil dual filter - to make it easier to get to the Block end of the lines, remove the oil filter adapter and move all that stuff out of the way.

    No leaks, no missing parts, everything fit - no problem.

    Tim

  6. #6
    Join Date
    Mar 2000
    Location
    Sylvan Lake, Michigan, USA
    Posts
    52

    Question Early Oil Cooler Replacement Lines

    I have a '94 P-30 motor home 6.5 with about 220,000 miles, all mine. It now sports an AMG forged crank, skirted block, replacement engine. The oil cooler lines seep a bit. Will your pre-96 line kit fit the P-30 chassis?
    Bill Carry
    Sylvan Lake Michigan
    '94 Georgie Boy Swinger 30' motor home
    6.5 TD front engine P-32 Chassis. GEP 400 replacement engine at 176000K.
    Stock except for remote PMD (inside the air conditioned motor home)
    Boost, EGT and Trans temp gage 260000 miles as of 10-14-19, all mine.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •