TheDieselPage.com Forums  
2014 - TDP's 19th Year
What's New: | Feature Articles: | Product Reviews: | Member's Area: | Subscribe:
Duramax 6600 Diesel Page | Advertiser's Section | Classified Ads | Photo Album | Diesel Books, GM Licensed T-shirts


Go Back   TheDieselPage.com Forums > The Diesel Page Member Forums > 6.2L Diesel
Register FAQ Members List Photo Album Mark Forums Read

6.2L Diesel 1982-93 6.2L Diesel - Member access forum for any questions or information exchange related to the 6.2L engine.

Reply
 
Thread Tools Display Modes
  #1  
Old 11-06-2011, 09:00 PM
woodwright woodwright is offline
Enthusiast
 
Join Date: Apr 2011
Posts: 50
Default Injector return fuel line

I pulled my 6.2 to swap out some gaskets, freeze plugs and hoses. The only 1/8" fuel line I can find is the clear lawn and garden variety. Will that be OK?
Reply With Quote
  #2  
Old 11-06-2011, 09:37 PM
DmaxMaverick DmaxMaverick is offline
Administrator
 
Join Date: Apr 2001
Location: CA
Posts: 10,492
Arrow

No. That won't work (for long, anyway).

A complete return line kit from Kennedy (or perhaps other TDP vendors) is $25. The kit is an injector service kit and includes all the lines, end plugs, injector coppers and air cleaner gasket, IIRC. If you want only the hose, contact him. I don't know if he sells it separately, but might.
__________________
1985 Blazer 6.2
2001 GMC 2500HD D/A
2014 Chevy Cruze Diesel
dmaxmaverick@thedieselpage.com
Reply With Quote
  #3  
Old 11-07-2011, 10:19 AM
CedarGrove CedarGrove is offline
I'm Pro GMO
 
Join Date: Apr 2006
Location: Cedar Grove, NC
Posts: 154
Default

Quote:
Originally Posted by woodwright View Post
I pulled my 6.2 to swap out some gaskets, freeze plugs and hoses. The only 1/8" fuel line I can find is the clear lawn and garden variety. Will that be OK?
I think I would look up a diesel shop in the phone book and give them a visit. I expect that they would have a spool of it and could sell you what you need + the clips if required with the particular type of hose that they use.
__________________
84 C10 J code intake.

83 C10 Scottsdale w/veggie conversion.

98 K3500 Silverado CC DRW, marine injectors, 4" exhaust (kitty cat MIA), boost and egt gauges, FSD relocated, #9 resistor thingy, reman Navistar block from Kennedy installed Jan 08, Reese Signature Series Gooseneck hitch.

95 C2500 F code. Rebuilt GEP. Daily driver since Jan 2014.
Reply With Quote
  #4  
Old 11-07-2011, 07:33 PM
rustyk's Avatar
rustyk rustyk is offline
Enthusiast
 
Join Date: Sep 2006
Location: Brooker, FL
Posts: 981
Default

Most NAPA stores stock it, as a kit of precut hoses and clamps.
__________________
'94 Barth 28' Breakaway M/H ("StaRV II") diesel pusher: Spartan chassis, aluminum birdcage construction. Peninsular/AMG 6.5L TD (230HP), 18:1, Phazer, non-wastgated turbo, hi-pop injectors, 4L80E (Sun Coast TC & rebuild, M-H Pan), Dana 80 (M-H Cover), Fluidampr, EGT, trans temp, boost gage. Honda EV-4010 gaso genset, furnace, roof air, stove, microwave/convection, 2-dr. 3-way reefer. KVH R5 In-Motion Satellite. Cruises 2, sleeps 4, carries 6, and parties 8 (parties 12 - tested).

Stand-ins are an '87 LWB Ext Cab Ford E-350 6.9L NA Diesel and a '94 Lexus LS-400.
Reply With Quote
  #5  
Old 11-07-2011, 07:53 PM
Robyn's Avatar
Robyn Robyn is offline
Missy Good Wench ( Moderator)
 
Join Date: Apr 2001
Location: Newberg Oregon
Posts: 7,952
Default

You can find it on ebay.
Here is an auction number 270659537940 at ebay

This is the stuff I got, its made in Germany and is a Push Lock type hose. Very good stuff

The stuff you want has a fabric cover and does not require clamps, except the rubber stoppers on the back end two nipples.

I bought some for the DaHoooley engine and it was great stuff.

Good price too
__________________
(1) 89 K5 Blazer Silverado
(1) 95 GMC Cowgirl Cadillac hauler Too much to list here but loaded to the moon with goodies
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 05:55 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 1996-2014 by TheDieselPage.com - All Rights Reserved