Activity Stream

Lets talk about the L5P for a second. Recently I have been shown the CEL and the Idash calls out a code for the MAP sensor along with a reduced...

Normally, I would say no, not necessarily high/low because of indicated high/low cylinders. In my experience, it is not, as long as the PWM's track...

Have pics?

The current programming is factory. I messed up years ago with the Predator, and had to have the dealership reflash the ECM. Since then I've not...

Mine has always done that. Before and after injector replacements (mine's had 2, as well as a separate return line replacement after filling the...

Both images here are with the transmission in "D" at idle, engine at operating temp. As an addition... The engine has always had a bit of a...

Wow. What a novel idea. Thanks so much.. Gonna try it today. Thanks again

If the brass cup is all that's left in there, rotating it won't hurt anything. It doesn't contact or surround the reluctor wheel, it's merely...

All that is left in the port is the brass housing.i tried to pry it out with a pick and a small screwdriver but it didn't budge. I was going to try...

What part of it separated from what part? Is it just the plastic that separated from the brass, or did the brass break below the port (like at the...