Activity Stream

I'm really enjoying the new settup, with a couple of almost-non issues. I'm understanding more about the settings, now that I finally got the tps...

As much as I am not a fan of a lot of the computer controls in our rigs..Most of the electronic transmission controls work pretty decent (Factory...

The engine in my burb has been out, it was was part of the big restoration process. It was an abandoned truck with multiple issues, if i had know...

We had a guy, back in Vermont, who did quite a few mechanical IP swaps, and, far as I know, he always did it on a manual, or swapped a manual in....

Any accessories on the front of the truck that could block airflow? What's the outside air temperature when the engine temps seem too high?...

I have a large bias against computers... My brain just doesn't mesh with using them, working on them, ect I converted my 98 3500 tow truck as it...

My son has some experience with the push-pull scraper (he's working on his journeyman heavy operator). It takes teamwork and communication, or it...

Was that going up 395 out of Bishop? Moving from Riverside to Susanville wife was driving my 74 C2500 pulling my 54 Ford with 283 and 4 speed. Hit...

Thanks for all the replies I really appreciate it I’m heading off for 6 months at the end of February from Victoria in the south east of Australia...

If, in fact, your gage indicates only midway BETWEEN 210 and 260, then no worries. That is absolutely normal when loaded and/or working hard. Your...

I have reread the owners handbook and think I’m worrying to much It says gauge shows engine coolant temperature It also provides an indicator of how...

Might be cost effective to just change the thermostat and see if anything else changes. Running at 210 doesn't give you much head room before the...

As I've said, bfore; Kennedy advised me, nearly 20 years ago, to stay electronic and I wish I had. I had already remote-mounted my PMD on a big...

I know it might be a pain, but i would add a second gauge to verify the OEM gauge. If you had a 6.5 then those temps could be normal... My Dmax...

Sounds like the Burb is on it's way back to being a daily driver Looking forward to having ours plated this summer as it gets turned into our road...

It always sits just under 210 if you’re not towing

A little catch-up. Finally got the tranny back in and been going through the wiring process of the Compushift. So, I finally got everything hooked...

Yeah, what does the gauge say when you're just tooling along unloaded?

Could the gauge be out of wack?

If, when your fan kicks on, it cools down, then it sounds like you have an airflow constraint. Since you've cleaned everything out, you may be up...

Fitted a new genuine radiator removed intercooler washed out a/c condenser and intercooler did improve but still does the same just have to live with...