Activity Stream

Be very sure when you reinstall the Top of the IP (Solenoid) that the linkage fits in correctly. Activating the solenoid should make a distinct...

Got back to the truck and removed the stop solenoid cover. So how does it look inside? Looks fine to me. And solenoid itself, Ok too....

Check grounds I stole the FSD and cooler from my Burb when i was getting a 3500HD running and diagnosing issues.I have another FSD on a cooler that...

I agree with Jim...85w-90 GL4 gear oil......... The synthetic is super slippery and is likely the cause of the shifting issue. The synchro rings...

Today, armed with batteries and booster cables, and a known fsd, i tried again fail. But the problem seems to be starting to surface,. When i...

Thanks for the replies and idea's the security light goes out after a few seconds.. with either ecm. So i have 2 ecm's to play with,. no fire for...

Sounds like the 99 burb that i restored a couple winters ago. Mine had an issue with the fuse powering the security system.Fuse tested good on the...

I agree with Casey. It's much more likely related to the ECM, specifically the security. Try the alternate PCM again.

Hmmm.... most injection pump failures I've encountered usually result in a rough running situation, but not a complete no start. Since it ran...

I stand corrected, but my old camper has a pump with impeller.

That is correct! ...

RV fresh water pumps are cam-driven diaphragm type. No impeller, and can be run dry indefinitely. They have no moving parts within water/liquid...

I would like to make a little comment, it is not good to run pumps dry, it will shorten the life of the impeller.

Yeah....That will do it...... Do some looking on places like ebay and scare up a factory wiring book.. These will get you spot on.....

Shorted out. Had fire

Take your time... lay out the harness on a big flat area to get familiar with it.Personally i would make notes and tag groups of wires heading to...

The entire truck, I have a universal harness

Hi A bit more specifics....Entire truck or just the engine ????

I know that the debate regarding whether to choose head studs or head bolts for a Duramax 6600 will likely never be completely resolved, but here's...

Your welcome. You too...