Got Injectors?

[BMDMAX]

I put the truck on the dyno yesterday to see what kind of gains were to be had from the Kennedy performance fuel injectors I just installed. I certainly was not dissapointed with the results! Best number was 742.5 HP and 1445.9 ft/lbs of torque. This was with the VA 200+ and nitrous. :D

http://bmdmax.u27.infinology.net/images/dyno6.jpg

[Kennedy]

FWIW, this is the identical program to what Darrell ran at the Pull Off. Nice torque rise as compared to the stacked combo.

Shows what I've been trying to say for a while in that stacking really doesn't gain you much for all the added fuel. Maybe give it 50HP out in the upper RPM

Using round figures at 100% increase foe a 200HP program, you take 90mm3 x2 gets you 180mm3 and then double again for the big module netting a command for 360mm3.

Take that same single box command yielding 180mm3 and add 40% for injectors gets 252mm3

There's over 200HP (108mm3) worth of fuel command getting lost somewhere in there. :confused:


Now we'll have to see if you can repeat it here on my Superflow in September at our Open House!

[BMDMAX]

I sure hope so! The open house is gonna be fun no matter what.

Tell that Superflow: "I'm coming for ya porkchop!" :D