pyrometer& boost

[j ray koster]

2002 duromax / allison / 4" stainless .
need information reguarding buying & installing
pyro & boost guages

[DinoMax]

The consensus (and the way I did it) is to drill & tap the passenger side exhaust manifold so you can mount you EGT probe pre-turbo. For boost reading, you can splice a "T" fitting into the wastegate hose. I have a pic or two of the probe location in the manifold if you go to the link in my sig., or you can do a search and find more info. Good Luck, DinoMax :D :D

[More Power]

The following two links show how/where to install the pyrometer.

Edge Attitude Installation (http://www.thedieselpage.com/reviews/attitude.htm)
Drilling & tapping the exhaust manifold. (http://www.thedieselpage.com/members/drillman.htm)

MP