PDA

View Full Version : Lost engine grounds



HANK1948
11-26-2005, 10:37
I have just installed a rebuilt engine in my brothers 95 4WD Suburban. Upon removal of the original engine some of the ground straps were seized and broke off at the eyelet. I have replacement ground straps but I cannot remember what they attached too.

DA BIG ONE
11-26-2005, 11:48
From any good sized (clean) stud on motor to chassis and put one from engine to firewall and another from battery ground to chassis/body use oxy guard on the threads and problem should not rear it's ugly head again.