Need filler neck measurement please.

[Maverick]

What is the I.D. (inside diameter) of the stock rubber filler neck hose that runs to the tank? Need this measurement to finish off my aux tank project. Just thought someone might have it without me taking mine off.

Thanks

[ccds]

Maverick:

I just measured my old filler neck rubber hose out of my 2003.
It is probably 2"...I measured 1 15/16" (ID)but I bet its 2"/

smile.gif

[Maverick]

Thanks CCDS! smile.gif

[BigLakeDMAX]

Maverick,

Did you end up getting the toolbox - tank combo from Northern Tool? How's the set up going?

Don

[jjackson]

Maverick, if you are asking about what size pipe to put in the filler line to tap a fitting into, I believe I used a 1 1/2 inch. Its a little smaller than the id of the hose, but seems to work fine (I took my breather vent tube out of my filler neck)

John

[Maverick]

Big Lake,
I am having Greer Tank in Anchorage build me a 60 gal with baffles for $325. No toolbox...just a tank. I would love the toolbox tank but can't justify $450 for the tank and then another $200 just to get it here.

JJ,
Thats what I am doing. I am going to leave the breather in mine. The 2" sound about right. I am running 1/2 ID line from the tank to the filler neck. I have a 1/2 ID ball valve off the tank. Should work nice.