PDA

View Full Version : Piston shave



7mmSTW
03-24-2002, 16:21
Does anyone out there know how much needs to be shaved off of a 6.5 piston to make 18:1 Compression with a stock head gasket?

Thanks

Seven

arveetek
03-25-2002, 12:39
I don't know if it can be done. The 18:1 pistons you can purchase have modified rods and wrist pin locations which basically moves the piston down in the bore.

If you shave a stock turbo piston, you ruin the ceramic coating, requiring that you re-coat it.

It also makes the piston top much thinner which is a bad thing as well.

I've looked into shaving pistons, and I know a guy down the road from me who's done it, but he's not sure exactly how much he lowered the compression.

I just wish those 18:1 pistons weren't so expensive!!

Casey

grape
03-25-2002, 14:43
are the stock 6.5's a flat top or do they have some funky dish on them?

triggerman
04-06-2002, 22:19
7STW
Forget the shave, you would loose the Hi Tec coating.