PDA

View Full Version : Ripleys Believe it or Not: New Submission



Jff24Gordn
04-19-2001, 19:21
Here is one for ya.
What happens when you take:
One 96 2500 4x4 lwb on 32" mudders, stock injectors, stock plate relocated to the sweet spot, pscotty air, afc cranked with origional spring, wastegate what wastegate??, stock clutch and free flowing kat.
a quarter mile drag stip at Muncie, IN
and a few short drives????

60' 2.429
330' 6.762
1/8 10.263 70.15 mph
1000' 13.281
1/4 15.813 89.35 mph http://www.62-65-dieselpage.com/ubb/biggrin.gif

and to back it up, I also ran:
60' 2.450
330' 6.821
1/8 10.326 70.03 mph
1000' 13.348
1/4 15.886 89.17 mph http://www.62-65-dieselpage.com/ubb/biggrin.gif

oh, and I put a g-tech on it.....
at 6640 lbs, fresh from a IMI truck scale, it said I had a max of 335 hp http://www.62-65-dieselpage.com/ubb/biggrin.gif, and out of the 5 runs it averaged out to 330 hp. Oh, did i mention that the only non-stock part is the air filter?? http://www.62-65-dieselpage.com/ubb/biggrin.gif http://www.62-65-dieselpage.com/ubb/biggrin.gif http://www.62-65-dieselpage.com/ubb/biggrin.gif

Now where is a nice new duramax when I need one, or a 275hp PSD? http://www.62-65-dieselpage.com/ubb/tongue.gif

------------------
1996 2500, 4x4, 5 speed, pscotty air, 15.813 second 1/4 mile @89.35 mph STOCK parts
Jff24Gordn@aol.com Great Lakes TDR (http://www.gltdr.org)
PURDUE STUDENT
GO BOILERS

mt1729
04-19-2001, 20:38
Hang in there and don't give up. Your times are a little high and speed a little low but keep working on it, in time you might keep up with the big boys.
mt

Jff24Gordn
04-19-2001, 21:32
This was my very first night on the drag strip. I wasnt hitting the start very hard, but not leting up at the end.

grape
05-03-2001, 20:20
15.80's, that must be scary fast.