PDA

View Full Version : Engine Heater



Burk
01-03-2002, 13:13
I have a 96 6.2 TD crew cab and lately when I plug it in to the house it flips the breaker that I have it plugged into. Any ideas about what is going on?

Burk

hoot
01-03-2002, 18:23
You mean 6.5 right?
It may be shot which could be giving you a dead short. I think you need to check resistance. Post this in the 6.5 forum.



------------------
Mike (dmax) DP Member #2429
2001 2500HD GMC Duramax/Allison Summit White CC/SB Loaded
Amsoil Air Filter
PS2K Propane, 22 Gal. LP Tank PIC (http://onramp.uscom.com/~hoot/cars/duramax/gmc/propane/bigtank1.jpg)
Straight Piped PIC (http://uscom.com/~hoot/cars/duramax/gmc/exhaust/jvn03.jpg)
Allison Deep Pan, Transynd Syn ATF PIC (http://uscom.com/~hoot/cars/duramax/gmc/allison/allis10.jpg)
SPA DG-111 Boost/EGT, Nordskog Digital Fuel Level PIC (http://uscom.com/~hoot/cars/duramax/gmc/allison/allis11.jpg)
VentShades, Husky Mudflaps, 255/85-R16 Dunlop Radial Rover RV's
Headlight Booster Kit from Kennedy Diesel (http://www.kennedydiesel.com)
TRUCK PICTURES CLICK HERE (http://onramp.uscom.com/~hoot/cars/duramax/gmc)
1994 K1500 Blazer 350 Loaded, Flowmaster duals

NH2112
01-03-2002, 18:25
First thing I'd do is try another extension cord. If that doesn't work and you know the outlet is good, then you have a short in the block heater cord.

------------------
Phil Smith, member #1841

"It's easier to get forgiveness than permission"

'85 K10, 6.2L, SM465, NP208, continuously being upgraded.