Question for mdrag

[Cheavyduty]

I saw your pictures of the cupholder switches you did. Where did you get the bezels for the switches from? Thanks

[mdrag]

Cheayduty,

The switches and bezels are made by COLE HERSEE (http://www.colehersee.com/catalog_top/index.htm). Search their online catalog, choose SWITCHES, ROCKER, and then one or two NEXT screens. From the drop down menus in the upper right, choose NOT APPLICABLE. There should be a listing of bezels for the rocker switches.

Part# 82159-1 (end section):

http://smartcat.colehersee.com/cad/82159-1-F.gif
http://smartcat.colehersee.com/images/B27%2082159-1.gif

Part# 82159-2 (center section):

http://smartcat.colehersee.com/cad/82159-2-F.gif
http://smartcat.colehersee.com/images/B27c%2082159-2.gif

Part# 98628 (hole plug for unused bezels):

http://smartcat.colehersee.com/images/B27%2098628.gif

I used the 58xxx switches - Part# 58328-104-BP, SPST 25A/12V, (1) dependent and (1) independent pilot light, as an example. The switch part number will vary depending on the configuration that you use:

http://smartcat.colehersee.com/images/B26c%2058328-103.gif

I bought all of my switches/bezels from ISS (http://www.instrumentsales.com/switches.htm). ISS did not offer online sales when I did my install, so you may have to give them a call. Good luck.

[Cheavyduty]

Thanks for the info. I plan to put my switches where the cassette used to be and these look like the perfect size.

[mdrag]

Originally posted by Cheavyduty:
Thanks for the info. I plan to put my switches where the cassette used to be and these look like the perfect size. I initially removed the cassette player and put the switches there. You will have to carefully trim the cassette opening so the bezels fit. I'll see if I can find a pic of the switches in that location.

mdrag

[mdrag]

Here is a pic of the COLE HERSEE SWITCHES (http://community.webshots.com/photo/59802499/79885074CibhfZ) in the cassette area.

mdrag