PDA

View Full Version : Front Suspension


DDD70
05-22-2002, 09:04
Putting on my new running boards I
noticed that my front suspension has
ZERO clearance on the yellow bumperetes.
Is this normal - or should the torsion
bars be jacked up.This is on 02 3500 D/A
2 wheel drive ex cab long box.
Thanks
P.S. don't know how to put facts on bottom
of page!E.G. truck type excetra
Black Dog
05-22-2002, 09:33
It is normal. That is the way it is designed.
IndigoDually
05-22-2002, 11:45
On the upper part of the screen under "post a reply" is "my profile" click there and go to edit your profile. There is a large box to type in your "signature". You can type on word and cut and paste it in.

John
Mike O.
05-22-2002, 15:25
Speaking of front suspenion, if I wanted to play with front end height how would I turn the torsion bars? Clockwise to raise, counterclockwise to lower?
MAXed Out
05-22-2002, 15:41
Mike O,

That's correct. Clockwise to raise, counter-clockwise to lower. Use a breaker bar with an 18MM socket.
mark45678
05-22-2002, 20:20
put 3 full turns on mine and it gave me 3/4 of a inch total lift its now of the bump stops . It did make it a little stiffer ride. put a few thousand miles on then see if your is the same ride hight from side to side ,most of us have found about 3/8 diffeance side to side....