1996 + glow plug control

[big61fourby]

Any OBDII guys done ronniejoe's glow plug mod? If so, which terminal at the ECM do i need? I think it's different from his OBDI.

Anybody have a set of books that could look this up for me? Thanks!

[More Power]

According to the book on the OBD II models:

PCM Connecter C1 - Pin C6 is the Glow plug relay control (connects to pin B of the glow relay.

PCM Connector C1 - Pin D7 is the Glow Plug Signal input to the PCM.

Jim

[big61fourby]

Perfect. Thanks a bunch!

[Kev-o]

I have a 98 and bought every thing i need not knowing there was a differance please explain?

[big61fourby]

The only difference I found between the 1996+ OBDII and ronniejoe's 1995 OBDI was the pin location on the ECM. Where he has pin C13, you need pin C6 (thank MP!). I used a test light and cycled the key just to make sure I had the right pin.

Other than that everything is the same. Clear as mud, right?

http://www.thedieselpage.com/members/features/manualglow.htm

[Kev-o]

Right! I am off to tackle it, Thanks