Got 599 block / 567 heads

[snoman87]

I pulled the valve cover off at lunch and confirmed that I have 6.2 head with casting# 567. I also traded a 88' TH400 2wd for a 94' 6.5TD in parts (all there except for the heads, turbo, and IP ... block is toast. I did get all the turbo manifold, injectors, oil lines intake and all the other stuff.

Because my 6.2 block has no front cover or timing stuff I thought I'd swap that stuff over, install a DB2-4911 pump, slap it back together and see how it runs.

Anyone got any suggestions ... besides the stud girdle and DSG timing gears?

[TB1]

Does it have the 6.5 lower intake manifold? if so do you want to sell it? PM me if you do with a price. Thanks Trevor

[Bnave95]

I pulled the valve cover off at lunch and confirmed that I have 6.2 head with casting# 567. I also traded a 88' TH400 2wd for a 94' 6.5TD in parts (all there except for the heads, turbo, and IP ... block is toast. I did get all the turbo manifold, injectors, oil lines intake and all the other stuff.

Because my 6.2 block has no front cover or timing stuff I thought I'd swap that stuff over, install a DB2-4911 pump, slap it back together and see how it runs.

Anyone got any suggestions ... besides the stud girdle and DSG timing gears?
You are doing a great job.

[jimmie]

snoman,just incase you dont know.beaware that the bolt pattern is slightly different from a 6.2 waterpump and a 6.5 waterpump when you get ready to reassemble! a 6.2 water pump wont bolt up to the same pump cover as the ones used on a 6.5.[older 6.2's anyway]..

[snoman87]

Thanks ... fortunately I have the timing cover from the 6.5TD