Got some Turbo specific questions, gas...

[WhiteHawk]

I just picked up a new 6.5 turbo and I am now planning to put it on my 390 stroker.

Heres a few questions google couldn't answer me:

- Is the AN fitting the oil inlet or the outlet?
- Should an oil cooler be used? Before or After the turbo?
- The only way to adapt the turbo exhaust outlet is with the stock downpipe and clamp?

Thank you!

[gmctd]

Inlet, drain at bottom

Cooler in oil filter circuit - very minimal flow thru turbo

That's the only known method - PatrickM makes his own exhaust outlet elbows, but wouldn't recommend it, aIr