looking for New Upper Control arms HELP!

[litz]

Running 38" tires on my 04 Crew 2500HD with Superlift kit on it. Need to replace upper ball joint, have pressed in 3 different ones, all pop out. Dealer says Upper Ball Joint is non service able, need to replace the entire A-ARM. I have 30K miles on the truck I am looking for a aftermarket A-ARM that has replace able ball joints. Any ideas???

[deadlyman]

I found some at kennedy diesel made by cognitomotorstorts made very nice with bolt in moog heavy duty ball joints

[mrwolf]

Once you press them in, you could TIG weld them at the lip. Just short welds (1/2 in) around the diameter and remember to keep the ball joint cool with a wet rag after you do each weld. If you need to replace them later, just cut the welds with a fiber wheel and press them out.

[96ccdd]

I second http://www.cognitomotorsports.com/ . they have gotten very good reviews.

[litz]

put the cognito motor sport A-Arms in and love them, easy install, and when i need to replace the ball joints again, they will have paid for themselves.

[kylant]

either cognito or CST.

I have the cognito and they are great