WANTED, HD alloy wheels, tires if possible.

[dieselrealtor]

I am looking for some (newer the better) takeoff wheels, tires if possible.
Please email or PM me if you have or know of any.

Thanks, Doug

[Craig M]

You need to provide a little more information. 15", 16", 20" or what size wheel. 5, 6 or 8 bolt wheel? Dually or single wheel? standard width or wide?

[dieselrealtor]

16", 8 lug, srw. Basically the stock alloys on the 2500 1999-present.

Thanks.

[DmaxMaverick]

Quite a few on Ebay now, and they do most of the time. Most have tires.

Ebay search keywords:
gm truck wheels; chevy truck wheels; gm factory wheels; chevy factory wheels.

[rat4go]

I posted the following a while back. I had a local deal go belly up and haven't tried hard to sell the wheels/tires since, but they're still available if you're interested. They now have closer to 2800 miles on 'em and I'd be dishonest if I didn't mention that since I posted the original message, I picked up a small nail in the center of the tread on one tire that was patched inside the tire and rebalanced.


The title of the old post mentioned that the tires are Goodyear Wrangler MT/R's, but the cut/copy below does not. Price is semi-negotiable, and meeting you somewhere between Indy and Lansing, Mi could be worked out as well.

Let me know if there's any interest....

Rich

__________________________________________________ ___________

I have a set of 285/75-16 load range D tires with about 2100 road miles on 'em mounted to a set of 8-lug factory forged alloy wheels. Wheels are in great shape (no clear coat damage, no bends, etc), tires are almost new with no damage, no plugs, etc.

Tires were 'tape' balanced to eliminate wheel weights on outside lip (and prevent the clearcoat damage that comes with the wheel weights)

Asking $1000 OBO for rims and tires. I'd also be willing to deduct $250 for "trade" for a set of factory alloy rims in similar condition to the ones I have these tires mounted to.

Would rather not ship as they'd be heavy and thus expensive! I'm in the S/E Michigan Area.

Call me at 248 521-9226 if interested.