Not sure if this is the right place, Gage Mount questions.

[1 Broke Dad]

Hi guys. I have a 98 GMC 4X4 and I am looking to put gages in it. The only mounts I see out there are A-Pillars, and universal mounts. Does anyone out there still make other mounts specifically for this year GMC/Chevy trucks?

Thanks.

[Robyn]

Good question
I dont really know but there is always the option to custom build something that suits you.

Robyn

[DmaxMaverick]

Lots of options. If you have an overhead console, you can install a gage mount in it, or you can use an overhead gage pod. One member documented his install in a thread where he punched holes in the center of the dash and installed them. Looked real nice. Also, have a look at the article/review "Got Gauges-Reloaded (http://www.thedieselpage.com/reviews/gauges2005.htm)". Several options, and excellent info on different gauge combinations and mounting.

[1 Broke Dad]

Lots of options. If you have an overhead console, you can install a gage mount in it, or you can use an overhead gage pod. One member documented his install in a thread where he punched holes in the center of the dash and installed them. Looked real nice. Also, have a look at the article/review "Got Gauges-Reloaded (http://www.thedieselpage.com/reviews/gauges2005.htm)". Several options, and excellent info on different gauge combinations and mounting.

Thanks, but it seems like everyone I talk to or website I visit only has the cool mounts for the new body styles. With mine being a 1998, I haven't seen many options.

[DmaxMaverick]

The overhead pod is available for your vehicle. If you have an overhead console, the bezel will fit that, too. Other than that, only pillar pods and stand-alone type mounts are available, for your year, and later. The only option left is DIY custom.