PDA

View Full Version : Turbo Master adjustment


Chris611
11-20-2006, 18:16
I have a Max-E torq computer and a Turbo MasterII wastegate control. I would like to run more conservative on the boost. Says 12 psi max for engine longevity. I was at about 15psi peak and 12 psi sustained per the instructions with the TMII. I tried backing off the nut on the the TMII and it hasn't seemed to lower the boost. Can anyone help me out. Do I need to put the lighter spring on? What boosts are you guys running with Heaths program and do you feel comfortable with it?

Thanks
Chris
DennisG01
11-20-2006, 19:24
Don't worry about the "peak" boost pressures. Base your decision on sustained boost. Seems like your right where you want to be!
Trek 6.5 TD Pusher
11-21-2006, 18:39
If you want less boost, just keep backing off the nut on the adjustment shaft. You probably just havn't gone far enough. You should be able to get it down to 10 lbs sustained with the spring supplied.