Heath Turbomater/Kennedy Boost controller

[rjwest]

Package deal: Was installed on (96 F Engine )
( Used approx: 10K miles.
Heath Turbomaster: Complete Kit with instructions.

Kennedy Boost controller ( Boost Fooler ),
Needed on my 96 to prevent " defueling '

Both 100.00 US + shipping....

Note: Boost controller has wire splice on 1 wire:
Used as experiment to determine Fuel Rate
With/without higher boost.

[Shikaroka]

You can't use both at once, right?

[rjwest]

If you use the Turbomaster and crank up the spring a little to tight( about 10psi) it will cause the PCM ( 96- 2000) to defuel ). I would get a defuel when I shifted out of
2nd under load( spike the boost)

Heath reccomends the PCM reprogram to prevent this,
The Boost fooler stops the PCM from defueling,

But if you have a Boost fooler , it will increase boost without a turbomaster,
I have seen 12psi plus on my truck ( to much for
steady use )

So if you want to get rid of the vacuum pump and not defuel without reprograming the PCM, you need both.

Unless you loosen the turbomaster spring to limit boost...

[Shikaroka]

Will you take, $100 shipped?
And, do you take Paypal?

[rjwest]

yes I'll take 100 us shipped, provided it ain't over 10.00

no paypal,

I'l send it to you , when you recieve it send me a check..

The diesel page honor system, if you don't like the package,
return with my shipping expense,
Is this ok????

[rjwest]

pm me your address if ok.

[Shikaroka]

Sure thing, thanks!
I just PMd you my info.

Todd